Hangzhou Shuangjiu Metal Technology Co., Ltd. · Steel Coil Storage SystemsFull product range: 99racking.com

Selection guide: six coil storage applications

The same RS100 system is configured differently across industries. Below are six typical applications with the layout logic for each.

1. Steel mills and cold rolling plants

Challenge: heavy coils, wide diameter range, high surface quality requirements. Loose timber wedges deform and crush, allowing coils to shift.

Configuration: storage positions grouped by coil diameter, fixed rail gauge and saddle spacing per group; four saddles per position at up to 40 t working load. Non-metallic contact surfaces for coated and galvanised coils, with end brackets controlling longitudinal movement.

2. Steel traders and warehousing

Challenge: mixed coil types, small batches, frequent turnover, floor space rented by tonnage.

Configuration: modular rails with relocatable saddles. Multi-layer arrangement in low season, wider aisles in peak season. Multi-layer storage requires load path and floor capacity verification.

3. Metal processing and stamping lines

Challenge: narrow line-side space, frequent crane or forklift handling, coils must be at fixed positions.

Configuration: short rail runs along the line, one coil number per position, saddles oriented toward the infeed side.

4. Non-ferrous coils: aluminium, copper, stainless, silicon steel

Challenge: the surface is the product. Aluminium is soft, copper oxidises, silicon steel coatings are easily scratched.

Configuration: fully non-metallic contact, contact stress checked against coil weight, denser saddle spacing for narrow coils.

5. Ports and logistics parks

Challenge: outdoor or semi-outdoor exposure, humidity, frequent lifting, impact and displacement risk.

Configuration: denser end brackets (indicatively every 30 m), joint alignment checks, UV and temperature assessment for outdoor use.

6. Machinery manufacturing coil stores

Challenge: mixed coil sizes, frequent in-and-out movement between fabrication bays, and limited floor area next to production equipment.

Configuration: positions sized by coil outside diameter, saddles placed along the aisle edge for forklift access, and rails laid to match the crane or forklift travel path so coils move one way instead of being re-handled.

Describe your site, get a layout proposal