What a system actually did in service, as opposed to what a data sheet claims. These are observation records from installed sites, not laboratory certifications. Client names are withheld.
| Item | Record |
|---|---|
| Coil weights in service | 20 t, 15 t and 10 t coils, mixed across the store |
| Storage arrangement | Three layers, each storage position loaded within the 40 t design limit |
| Inspection interval | Every two months |
| Observation period | 12 months |
| Findings | No visible indentation on the saddle contact surface, no deformation of rails, no displacement or instability of coils |
| Record type | Manufacturer field observation, not third-party certification |
Before: loose timber wedges, coils repositioned by hand, no fixed storage positions.
Change: timber replaced with polyolefin saddles on reinforced rails; coils grouped by outside diameter into defined positions.
Recorded result: stable coil positions and a cleaner contact surface; storage density increased because positions are planned rather than improvised.
Constraint: the coil surface is the saleable product, so any metal-to-metal contact is a reject risk.
Configuration: non-metallic saddle contact throughout, end stops on the aisle side, saddle spacing reduced for narrower coils.
Recorded result: no contact marks reported over the observation period.
Constraint: longitudinal and transverse inertia during sea freight moves unprotected coils.
Configuration: saddles and pallets form the restrained base inside the container, with timber and lashing controlling residual movement.
Documentation: HS 7308900000, REACH and RoHS reports supplied with the shipment.
Constraint: frequent lifting, impact from handling equipment, outdoor humidity.
Configuration: four saddles per position at up to 40 t, denser end brackets than an indoor installation, joint alignment checked at every rail connection.
Note: outdoor use requires a project-specific UV and temperature assessment.