Hangzhou Shuangjiu Metal Technology Co., Ltd. · Steel Coil Storage SystemsFull product range: 99racking.com
RS100 STEEL COIL SADDLE STORAGE SYSTEM

Steel Coil Saddle Storage System

Polyolefin saddles + internally reinforced steel rails · modular · up to 40 t per storage position

RS100 steel coil saddle storage system installed in a warehouse
40tDesign working load / position
168kN+Rail insert tensile result
Φ600-2200mmCoil OD range
REACH+RoHSCTI compliance reports

Product overview

The RS100 is a modular support and positioning solution for organised steel coil storage. It combines moulded polyolefin saddle supports with connecting rails containing a continuous steel reinforcing bar, plus rail fittings, parallel spacer bars and end fixing brackets. The system creates defined support points and organises coil storage positions according to the approved project layout.

The polymer contact surfaces provide a non-metallic interface between support and coil. The rail incorporates an internal continuous steel reinforcing bar, a manufacturer-stated design feature, to improve tensile resistance and connection integrity. Final configuration must be selected according to coil dimensions, weight, storage arrangement, floor conditions and handling method.

System components

ComponentFunction
Saddle supportProvides the designated bearing contact point. Reference layout: four saddles per storage position.
Connecting railSupports and locates saddle positions in a modular row. Nominal length 1,600 mm.
Internal steel reinforcementContinuous steel reinforcing bar inside the rail; intended to improve tensile resistance.
Rail connecting fittingsConnect adjacent rail sections and maintain assembly integrity.
Parallel spacer barMaintains spacing and alignment of parallel rail runs; indicative one bar every 3-4 positions.
Rail stop / fixing bracketUsed at rail ends and selected intervals, indicative every 30 m.

Technical specifications

ParameterReference data
Saddle body materialPolyolefin plastic; exact resin grade to be confirmed per batch
Rail constructionInternal continuous steel reinforcement; metal inserts / connectors
Individual saddle dimensionsApprox. 410 x 140 x 250 mm
Indicative saddle weightApprox. 10.9 kg per saddle
Rail section lengthApprox. 1,600 mm nominal, connectable end-to-end
Indicative rail weightApprox. 10.2 kg per 1,600 mm section
Coil outside diameter600 - 2,200 mm (project confirmation required)
Coil width800 - 2,200 mm (project confirmation required)
Reference configurationFour saddle supports per storage position
Recommended design working loadUp to 40 metric tonnes per storage position
Customs codeHS 7308900000

Material testing - CTI laboratory report

From CTI Test Report No. A2260880383101, testing period 14-23 October 2026. Results apply to the submitted sample only.

PropertyMethodResult
Tensile strengthASTM D638-2022, Type 1, 50 mm/minAverage 22.0 MPa
Shore hardnessASTM D2240-15(R2021), Type DMedian Shore D 69
Compressive strength at 50% strainASTM D695-26, 12.7 x 12.7 x 6 mmAverage 44.4 MPa

These are material specimen results. They are not the rated capacity of one saddle, nor proof of the installed system's load capacity.

REACH and RoHS documentation

DocumentReportConclusion
REACH SVHC screeningCTI No. A2260880951102001, 10-30 Oct 2026PASS, concentrations <=0.1% w/w, 253 substances screened
RoHSCTI No. A2260880951101001, 10-15 Oct 2026PASS against 2011/65/EU as amended by (EU) 2015/863

Load and durability verification

Summarised from manufacturer internal test record ZWH-2025-010 (test period January 2024 - January 2025). Internal record, not a third-party accredited certificate.

TestMethodResult
Static compressionOne rail, two saddles; stepwise loading, 60 min per levelNo abnormality at 10 / 20 / 30 / 40 / 45 t; slight indentation at 50 / 60 t; noticeable at 80 t
Rail insert tensileThreaded rod with two rail fittings as an assemblyExceeded 168 kN
Field observation20 / 15 / 10 t coils, three-layer arrangement, each set within 40 t; inspection every two months, 12 monthsNo visible indentation, deformation or instability recorded

Installation sequence

  1. Align rail ends and thread the connecting fittings into the internal bolts.
  2. Check rail width at each joint with a caliper to avoid misalignment.
  3. Fit parallel spacer bars according to coil width, indicatively every 3-4 positions.
  4. Place saddles symmetrically, leaving 2-3 positions clear at each end.
  5. Fix brackets at rail ends and approximately every 30 m; tighten bolts.

Multi-layer storage requires project-specific engineering review and written confirmation of load path, contact points, stability and floor capacity.

Technical dossier

Download RS100 Technical Dossier (PDF)

Frequently asked questions

What is the load capacity?
Up to 40 metric tonnes per designed storage position with four saddles, subject to project engineering and load distribution confirmation. Internal static compression tests recorded no abnormality at 10-45 t.
Is the saddle rubber or plastic?
The saddle body is moulded polyolefin plastic, not rubber. CTI reported 22.0 MPa tensile strength, Shore D 69 hardness and 44.4 MPa compressive strength at 50% strain.
Which coil sizes are supported?
Coil outside diameter 600-2200 mm and coil width 800-2200 mm, subject to project confirmation.
Can the system be exported to the EU?
Yes. REACH SVHC and RoHS screening both PASS; customs code HS 7308900000.
Send coil data for a proposal